Laser edging - Prime Acrylic Alabaster Gloss Designer: Jaden Allworthy, Bates Joinery

Caring for your Thermoform doors

Dezignatek Thermoform doors are designed to be generally low maintenance; however we do have some pointers for looking after them:

While Thermoform doors and panels are water-resistant, they aren’t waterproof. Care should be taken to ensure that they don’t have excessive exposure to water, steam or extreme humidity.

Care should also be taken to protect doors from high temperatures - such as hot implements or heat leaks from faulty appliances.

Generally you should clean doors with a warm damp cloth which has had the excess water removed.  Any moisture remaining after cleaning should be removed with a dry cloth.

Never use the following on your doors: abrasive cleaners, Janola or similar, scourer pads, wire wool, sand paper, or solvents and thinners.

Caring for Melamine

The Bestwood and Prime Melamine surfaces we use are low maintenance and easy to clean. Simply wipe down with a clean, damp cloth. With stubborn grease and grime, use vinegar diluted with water or Selleys Sugar Soap.

Important: Always wipe with a damp cloth, then a dry cloth after cleaning to remove moisture. Never use abrasive cleaners or cleaning tools on Prime Melamine such as Jif, Vim, Brasso, steel wool or abrasive sponges. We also recommend caution in using bleach and alcohol-based cleaners. Dilute bleach:-  one part bleach to three parts water.

Caring for  your Prime Acrylic surface

Prime Acrylic is hard wearing and easy to clean and has a very good level of scratch resistance.  For best cleaning results, use a micro-fibre cloth or wet chamois with a solvent-free, non-abrasive cleaner or detergent.

• Do not use brushes, scourers or scrapers.
• Avoid paper towels and do not dry-wipe the Prime Acrylic
surface.
• Vuplex can be used to keep the acrylic surface in the best
condition – weekly use is recommended.

Important: Always wipe with a damp cloth, then a dry cloth after cleaning to remove moisture. Never use abrasive cleaners or cleaning tools
on Prime Acrylic such as Jif, Vim, Brasso, steel wool or abrasive cleaners.

Caring for Laminate (HPL)

Prime Laminate is low maintenance and easy to clean. For regular cleaning, simply wipe with a clean damp cloth. Stubborn grease and grime can be cleaned using diluted vinegar and water or sugar soap. Stains should be tackled early with hot, soapy water or glass and surface cleaner.
General cleaning guidelines for different surface finishes can be found on the Prime Laminate Technical Data Sheet.  For Soft-matt surfaces, the use of a sponge such as a Glitz Wipe-out sponge is effective at removing light scratches and marks.

Need help or want to see our work?

Whether you're a joinery or design professional wanting help with your project, or want to see some finished products, we can point you in the right direction.

You are now selecting products Click on a swatch to select or deselect it Selecting products Tap swatches to select/deselect
0Products selected
Done
No swatches selected Added to collection To add samples to the collection, you must first select them by clicking on the swatches below. No swatches selected Added to sample cart To add samples to the sample cart, you must first select them by clicking on the swatches below.